建筑物掏土纠倾法单孔与多孔塑性区特性研究及工程应用

在建筑物水平掏土纠倾工程中，掏土孔间距是影响纠倾工程安全与工期的重要因素。为了快速准确地确定纠倾工程中的水平掏土孔间距，研究了单个掏土孔和多个掏土孔情况下孔周边土体塑性区发展特性。利用土体塑性力学分析计算得到了单孔下的孔周土塑性区半径，而后通过有限元模拟得到孔周土体塑性区半径的数值解，将孔周塑性区半径解析解与数值解进行了对比。并通过有限元数值模型研究了多个掏土孔相互影响情况下的塑性区发展规律，以孔间土体塑性区贯通时的距离作为掏土孔间距。考虑土体参数随机特性的影响，研究不同上部荷载作用下掏土孔间距的取值变化规律，上部面荷载与地基承载力特征值比值用p表示，孔间距与掏土孔直径比值用n表示。研究发现：多孔塑性区半径（孔间塑性区贯通时）是单孔塑性区半径的1.3倍左右;标准化荷载p与孔间距比值n二者呈线性关系;通过不同土体参数及上部荷载的不同情况下的p-n曲线，给出了掏土孔间距建议值。同时，将研究结果与三个实际工程进行对比，发现p-n曲线法与实际结果更为接近。     

HACCP在浓香菜籽油生产中的应用

为了保障浓香菜籽油的产品质量安全,采用HACCP体系对浓香菜籽油生产全过程进行生物、物理、化学的危害分析,确定关键控制点,制定预防措施,并对生产环节进行有效监控,制定纠偏措施,做好记录管理,为浓香菜籽油的安全生产提供借鉴。     

Simulation and energy optimization of the stabilizer tower of a pyrolysis gasoline hydrogenation unit

Energy optimization of second distillation tower of a pyrolysis gasoline hydrogenation unit has been studied by the thermal cycle of vapor recompression method. The mentioned cycle is connected to the second distillation tower of the stabilizer of pyrolysis gasoline, and the results are found promising. The composite pinch curve for both the current and the optimized methods are shown. Moreover, an increase in the heat transfer rate in heat exchanger E-1014 causes energy recovery in reboiler. According to simulation results, by vapor recompression to 1970 kPa and using this heat source for thermal integration, condenser and reboiler’s energies are decreased by 56.93 and 30.4 percentage, respectively.     

Economic effects of regulating the seismic strengthening of older buildings

The marked increase in the awareness of earthquake risk following the Canterbury earthquakes in New Zealand offered a unique opportunity to investigate the economic effect of disaster-mitigation regulations on the commercial building stock. A difference-in-differences (DD) framework was used to determine whether earthquake risk has been capitalized into the property prices of buildings constructed prior to 1976, as a response to the national policy requiring assessment and strengthening (or demolition) of the existing earthquake-prone building stock. A negative externality is found in the policy announcement on affected (pre-1970s) office and retail buildings which caused office buildings to suffer a 12.5% stigma discount. However, retail properties were less impacted suffering a 2.3% stigma loss. The value of the commercial building stock has been affected by the policy. These findings provide policy-makers with timely evidence as to the economic effects of New Zealand’s earthquake-prone buildings policy. Facing losses in property value and financial responsibility for retrofitting their assets, building owners will be looking for a workable set of regulatory and non-regulatory incentives to encourage disaster risk management and protect the built environment.     

采动覆岩卸荷膨胀累积效应

地下煤层开采引起的岩层运动是一系列安全和环境问题的根源,研究采动岩层运动规律是安全、高效、绿色开采的重要基础。通过对岩层运动过程的研究,揭示了采动覆岩卸荷膨胀累积效应及其对岩层运动规律的影响机制。研究表明:采动覆岩经历了卸荷膨胀与再压实的动态过程。受关键层结构控制,上覆岩层由下向上成组破断运动,关键层破断前,阻断了上覆载荷向下方岩层的传递,导致其因卸荷而产生膨胀,包括碎胀与弹性膨胀。随着关键层破断高度增加,覆岩卸荷高度同步增大,因卸荷而膨胀的岩层总厚度不断增大;同时卸荷煤岩也受到已破断关键层载荷的压实作用,从而造成覆岩卸荷膨胀总量的不断变化。将这种覆岩卸荷膨胀总量随覆岩卸荷高度动态变化的现象定义为采动覆岩卸荷膨胀累积效应,进而建立了理论模型,并通过淮北海孜煤矿巨厚火成岩下采煤覆岩裂隙实测进行了验证。结果表明,采动覆岩卸荷膨胀累积效应对采动岩层运动规律产生了重要影响,如影响覆岩关键层下离层量,影响覆岩关键层贯通破断的高度,影响不同开采条件的地表下沉系数等。采动覆岩卸荷膨胀累积效应改变了对离层存在形式的传统认识,该效应的存在导致关键层下最大离层量一般小于采高的10%,覆岩可注浆充填空间并非传统认识上的“离层区”,而主要是注浆充填压力“压实”作用下将覆岩卸荷累积膨胀所转化出的那部分空间,该发现指导了覆岩隔离注浆充填绿色开采技术的创新研发及其在建筑物压煤开采中的成功实践。     

Spiraling elliptic breathers in nonlocal nonlinear media with linear anisotropy

The dynamical properties of spiraling elliptic breathers in nonlocal nonlinear media with linear anisotropy are analytically discussed. Using a two-dimensional asynchronous fractional Fourier transform, the exact analytical solutions of spiraling elliptic breathers are obtained to the nonlocal nonlinear Schrödinger equation with unequal diffraction coefficients in the highly nonlocal limit. It is found that the spiraling elliptic breathers exhibit a kind of molecule-like libration due to the combined effects of the linear anisotropy and the orbital angular momentum. The angular velocity of the spiraling elliptic breathers is discussed, which can be controlled by the linear anisotropy parameter. In the media with linear anisotropy such as uniaxial crystals, the angular velocity of the spiraling elliptic breathers can be controlled by changing the propagation directions of optical beams. Furthermore, the nonlinearity of media is found to enhance the rotation effect of spiraling elliptic breathers.     

30CrNi3MoV钢的热变形行为及热加工图

采用Gleeble-3500热模拟试验机对30CrNi3MoV钢进行单向热压缩试验,研究了其在变形温度950~1150 ℃、应变速率0.01~10 s^-1的热变形行为,构建了应变补偿型流变应力本构方程,并绘制出该钢的热加工图。结果表明,30CrNi3MoV钢真应力-真应变曲线有3种不同特征:高温小应变速率时,表现为典型的动态再结晶过程;低温小应变速率时,曲线为动态回复特征;应变速率较大时,应力随应变的增大而增大,无明显的峰值应力。采用5次多项式拟合构建的应变耦合流变应力本构方程具有高的精确度,采用该方程获得的预测值与试验值的平均相对误差为3.2%,相关性系数R值为0.993。从热加工图中得到试验钢最佳的热加工工艺参数范围是:变形温度为1020~1150 ℃、应变速率为0.03~0.35 s^-1。